1. AE series mobile smoke eater for welding
2. Brief Intro. of AE series mobile smoke eater for welding
AE series single moible smoke eater adopts the advanced filter
It provides the perfect solution for welding fume, and
professionally design for collecting the
welding fume. So the mobile smoke eater provides serives for
purifying the fume and dust.
Before welding fume dust goes into the welder's breathing zone, the
smoke eater can collect
at the weld source.The filter cartridge further collects the
hazardous submicron particles on
the surface of nanofiber membrane to avoid circulatory blowing to
For matching factory different location installation requirement,
the mobile smoke eater can
separate two kinds with self-cleaning and without self-cleaning.
3. Application of AE series smoke eater
The smoke eater adopts collection of the fume and dust in different
such as welding (arc welding, carbon dioxide arc welding, MAG welding,
carbon arc gouging
welding, special welding etc.) ,polishing, cutting, burnishing etc.
4. Working principle
The fume and dust produced in the operation process is inhaled to
the mobile welding fume
smoke eater through the gas absorption cover due to the gravitation
of the fan.The large
particles are separated and intercepted by the pre-filting fire
resistance net.After initial
filtration, the fume and dust will arrive at the filter cartridge
protective plate and further
obstruction to particles and residual fire fume.
The filtered fume and dust enters the main filter cartridge.The
main filter cartridge are made
of imported polyester fibers covered with film mulching and the
filtration efficiency can
reach up to 99.9%. The purified gas is further purified by
activated carbon layer filter cotton
and discharged standard through the air outlet.
7. Contact way